Our Process

  1. A small hole is created around the problem area.
  2. The supporting piers are pressed into the ground one by one.
  3. The piers are capped by either a solid concrete block or a steel pier head.
  4. A hydraulic jack is added to the block.
  5. The jack raises the foundation into the correct position.
  6. The jack is replaced by concrete cylinder and metal shims.
  7. The excavated area is filled in when ready.
  8. The foundation is now incredibly secure thanks to Bats Foundation Repair!
Location of foundation problem
Supporting piers placed under foundation
Hydraulic used to raise foundation
Jack is replaced with cylinders
Completed foundation repair

The Bats Foundation Repair Lifetime Warranty

Bats Foundation Repair maintains one of the best warranties in the industry. Simply put, the piers we install are covered for the lifetime of the structure.

For steel piers, if any adjustments are required during the life of the home due to settling, Bats Foundation Repair will adjust all piered areas at no cost to the homeowner. Our concrete piers are still covered by a lifetime warranty and have zero adjustment charges for the first five years. After five years, there is a nominal adjustment charge.

For Pier & Beam homes We offer A three year warranty on reshim and pad & block system.

Regardless of which option You choose, You can rest assured that we stand behind our piers with a lifetime warranty.

If you have any more questions on the fine print, feel free to give us a call and we can go over this with you.

Concrete/Steel Pilings

Use of pressed pilings

Pilings are vertical structures that are pressed into the earth and support the foundation slab or beams. Pressed pilings come in two configurations, concrete and steel. Concrete pilings are concrete cylinders stacked on top of one another. The advantages are that they won’t corrode and are cost effective.

Use of steel pilings

Traditional Steel pilings are able to be driven deep, however, there is a potential drawback to the standard method of installation. They tend to be expensive and traditional steel pilings are bracketed to the side of the home, thereby providing no support directly underneath the slab. When installed with this method, the pier itself is only as strong as the bracket that supports the weight of your home. A newer method of steel piers is installing them directly underneath the perimeter grade beam in the same fashion as the pressed pilings. This eliminates the bracketing element from the system so that the weight of the home is supported directly by the steel piers.

Use of spread footings

Spread footings are a cheaper, temporary measure that creates a block (usually concrete) below a pier to keep it from sinking any farther. They may work temporarily, but will need a permanent solution.

More Services

Foam Injection

Foam injection can be used to stabilize & repair sidewalks, driveways, patio porches, raise the center of the house up and fill slab voids.
Learn more

Pier and Beam

Pier and Beam homes typically have a crawl space and require additional consideration during repair.
LEARN more

We want to hear from you!

CONTACT US